Product model: 3io-LS3000
Product name: Molybdenum disulfide extreme pressure composite lithium base grease
Specifications: 15Kg 170Kg
Product use: Forging machine roller bearings, conveyor bearings, gears, vehicle axles, chassis, large motors, water pump metallurgy, construction and other various parts of the lubrication of friction parts.
Product category: Molybdenum disulfide and special grease
Product Details
Molybdenum disulfide extreme pressure composite lithium base grease is refined mineral oil with soap-based thickener, plus additives such as extreme pressure, anti-oxidation, anti-rust and molybdenum disulfide powder, and refined by contactor circulation fat-making process. Molybdenum disulfide grease is a multi-effect, long-life grease with good mechanical stability, rust resistance and oxidation stability, colloidal stability, oxidation stability, thermal stability, water resistance, and extreme pressure and abrasion resistance. performance.
I. Main technical indicators
Item Typical data Test method
Working penetration 0.1mm 230-260 GB / T269
Dropping point ℃ greater than 260 GB / T3498
Corrosion (T2 copper sheet, 100 ℃, 24h) No green or black change on copper sheet GB / T7326 (B)
Evaporation (99 ℃, 22h)% is not more than 2 GB / T7325
Extended working cone penetration (100,000 times) 0.1mm 230-260 GB / T269
Similar viscosity （-10 ℃ ， 10s-1） Pa.s is not less than 3087 SH / T0048
Main performance:
The friction coefficient of molybdenum disulfide is lower, especially under the condition of heavy load, the friction is lower, and the high temperature resistance is better. It can reinforce the lubricant film under heavy load, vibration shock or high temperature for a short time. Therefore, this product is especially suitable for the lubrication of heavy load and transient high temperature parts.
Product use:
1.Applicable to the lubrication of heavy-duty gears and bearings such as steel rolling machinery, mining machinery, construction machinery, heavy lifting machinery, injection molding machinery with an operating temperature in the range of -20 ° C to + 180 ° C, and can be used for impact loads Of parts.
2. Used for passenger cars and trucks under medium speed, medium load, and other severe conditions. Suitable for maintenance of tires and other parts of vehicles such as Steyr and Dongfeng.
3. Used for parts with impact load. Lubrication of friction parts of various equipment such as roller bearings, conveyor bearings, gears, vehicle axles, chassis, large motors, water pump metallurgy, construction, etc.
Three, matters needing attention:
During storage and transportation, water and dust pollution shall be prevented. During use, the lubricating parts must be cleaned.
Fourth, packaging specifications:
This product is packed in 15Kg and 170Kg.
