Product model: 3io-TL-3188-91
Product name: High-elasticity anti-friction coating JM10
Specifications: 5Kg
Product use: Vibration disks in the self-control industry, such as grain and fertilizer storage tanks, chute conveyors.
Product category: Molybdenum disulfide antifriction coating
High-elasticity anti-friction coating JM10 has red, blue, gray or black, two-component, room temperature curing type. Abrasion resistance surpasses high carbon steel. Forms a strong bond with primed steel, stainless steel, aluminum, concrete, masonry, fiberglass and wood. Alkali resistance (hydrolysis resistance), good non-stick performance, good safety performance, non-toxic in contact with food and food, can also be used in meat, poultry, beverage processing equipment and industrial facilities.
High-elasticity anti-friction coating JM10 main uses:
Vibration disks in the self-control industry. Grain and fertilizer storage tanks, chute conveyors. Chassis of sand carrier, bucket of earth moving shovel, industrial floor and auger, etc. It is also widely used in the mining industry, such as FRP spiral grooves, magnetic separators, flotation machines, dump trucks, conveyor belts, filtration equipment and fly ash mortar tanks. It is also widely used in the hydropower generation industry, such as dam gates, garbage baffles, water tanks, pumps, impellers, and hoods. It is also widely used in the pulp and paper industry, such as instrument panels and conveyor pipes, which require reduced mechanical equipment noise. It is also widely used in agricultural machinery, such as screw elevators, screws that need to reduce noise and wear, grape juice chassis and collection boxes.
Main characteristics of high elasticity antifriction coating JM10:
1. Abrasion resistance: JM10 has better abrasion resistance than other rubber linings and coatings when it is severely worn, exceeding high carbon steel. The following is a comparison test of Tabor abrasion according to ASTM D4060 standard under H-10 wheel, 1000 g, 1000 rpm.
Weight loss
Carbon steel ---------- 500 mg
Alloy steel-400 mg
JM10 ---------- 35-40 mg
2. Adhesion: When tested on the painted steel surface, the adhesion strength of JM10 exceeds 5.6KN / M. According to the requirements of ASTMD903 standard test, JM10 will reach a large elongation and break instead of adhesion failure . JM10 should have perfect adhesion on primed steel, stainless steel, aluminum, concrete, masonry, FRP and wood surfaces.
3. Alkali resistance (hydrolysis resistance) According to the requirements of ASTM D543 and ASTM D412 standards, immersed in 10% potassium hydroxide solution and 10% sodium hydroxide solution for two months at 24 ° C. There is no visual Changes that still retain all of its elastomer properties.
4. High-thickness film sprayability: JM10 can quickly reach high-thickness film through multiple spraying. Spraying at a rate of 100 square inches per gallon can produce a dry film thickness of 200 microns.
5. Non-adhesion performance: Dry food and chemicals are not easy to adhere to the smooth surface sprayed by JM10. JM10 provides perfect non-stick properties for ice, cement, sand, coal, ore, grain and most chemicals. The running speed of this article on the coating can be greatly accelerated, improving production efficiency.
6, hygienic performance: JM10 can be used in meat, poultry, beverage processing equipment and industrial facilities.
7. Agriculture: JM10 has good safety performance and is non-toxic in contact with food and food.
8. Does not contain heavy metals: JM10 component does not contain heavy metals. Therefore, it will not pollute water when used in marine and aquatic industries.
How to use JM10 high-elasticity anti-friction coating:
In the environment of normal temperature and humidity, thoroughly remove the rust, oil, and dirt from the surface of the workpiece. After sandblasting the metal surface, the adhesion of the lubricating and anti-wear layer will be increased. The coating method is applied to the surface of the object. Production refers to the specific production process.
High-elasticity anti-friction coating JM10 precautions:
Do not allow the product to come in contact with the eyes. If you accidentally splash into the eyes, lift the eyelids and rinse with running water or normal saline; do not swallow the product.
Validity: 6 months (placed in a cool place).
