Shanghai Yilin Lubricating Material Co., Ltd.
Service Hotline:021-60513232
Quick-drying molybdenum disulfide spray
Quick-drying molybdenum disulfide spray

Product model: 3io-MR-2188K

Product Name: Quick-drying Molybdenum Disulfide Spray (Chinese and English)

Product specifications: 500ML, 24 cans / piece

Product use: quick-drying, temperature-resistant, extreme-pressure lubrication

Product category: Molybdenum disulfide lubricant spray

Main features:

1. With extreme pressure resistance, corrosion resistance and lubricity, strong adhesion.

2. Wide temperature range. -40 ° C-120 ° C.

3. Easy to carry and simple to use.

Quick-drying molybdenum disulfide lubricant spray is a high-efficiency dry film lubricant spray containing ultrafine molybdenum disulfide (MoS2). Has low friction coefficient, anti-adhesion and other characteristics. It is mainly used for the assembly of metal parts and the lubrication of sliding surfaces.


1. Pre-assembly process: Quick-drying molybdenum disulfide spray can provide protection during assembly. When using spray, an ultra-thin lubricating coating will be formed on the surface of the assembled parts without changing the fitting tolerances of the parts.

2. Lubricity performance: Quick-drying molybdenum disulfide spray avoids the problems of conventional wet lubricants in the application, and can provide dry lubrication in the case of excessive dust. Ideal for sliding guides and rotating guides of various types in textile printing and dyeing machinery.

3. Spraying is used for the installation and running-in lubrication of bearings, slide rails, guide rails, splines, guide grooves, and screw rods under high load.

4. Spraying is used to assemble and lubricate threads, shaft sleeves, fasteners, seals, valves and other piping systems, tracks, pulleys, gears, etc. under extreme pressure environments to prevent mating parts from seizing and sintering.


1. Before use, thoroughly wash the dust and oil on the surface of the object before coating.

2. Shake the tank vigorously for about 30 seconds to facilitate uniform spraying.

3. When spraying, move back and forth from the workpiece 20-30cm to spray uniformly.

4. The film can be hardened at normal temperature, but its coating film will be stronger under the conditions of 120 ° C and 15 minutes or more.

5. After use, turn the tank upside down and spray for about 5 seconds to clean the nozzle to prevent plugging.

Packaging and storage:

1. Packaging: 500ml / can, 24 cans / piece.

2. Storage: Store in a cool, dry and ventilated place. The shelf life of the product is 1 year.

Address:No. 4, Lane 3821, Jiasong North Road, Fangtai Road, Jiading District, Shanghai  电话:021-60513232  MobilePhone:13817653540