Shanghai Yilin Lubricating Material Co., Ltd.
Service Hotline:021-60513232
Banner
LLL high temperature resistant MOS2 spray
LLL high temperature resistant MOS2 spray

Product model: LLL-MR-2088G

Product name: LLL high temperature resistant MOS2 spray (Chinese and English version)

Product specifications: 500ML, 24 cans / piece

Product use: temperature and extreme pressure lubrication

Product category: Molybdenum disulfide lubricant spray

High temperature resistant molybdenum disulfide lubricant spray (thimble oil) is based on the fast-drying molybdenum disulfide spray, adding high temperature resistant components, fast film formation, and high temperature resistance. The formed film is resistant to low temperature -80 ℃, high temperature 350 ℃, and the film layer is wear-resistant, durable and effective. Suitable for slow sliding surfaces. Good durability and can reduce noise. High temperature resistant molybdenum disulfide spray is widely used in machinery, shipbuilding, steel, textile, forging, hardware, aviation and many other industries.

Main features:

1. Has good thermal stability, extreme pressure resistance and lubricating properties.

2. It has a wide temperature adaptation space, and the best temperature resistance range is -80 ℃ -350 ℃.

3. Easy to carry and simple to use.

application:

1. Pre-assembly process: High temperature resistant molybdenum disulfide spray can provide protection during assembly. When using spray, an ultra-thin lubricating coating will be formed on the surface of the assembled parts without changing the fitting tolerances of the parts.

2. High temperature lubricant: stable lubricating film can be formed at -80 ℃ to 350 ℃. Dry lubricants are widely used as high-temperature lubricants in the steel industry.

3. Lubricity performance: High temperature resistant molybdenum disulfide spray avoids the problems of conventional wet lubricants in application, and can provide dry lubrication in the case of excessive dust. Ideal for sliding guides and rotating guides of various types in textile printing and dyeing machinery.

4. Spraying is used for the installation and running-in lubrication of bearings, slide rails, guide rails, splines, guide grooves, and screw rods under high load.

5. Spraying is used for the assembly and lubrication of threads, bushings, fasteners, seals, valves and other piping systems, crawlers, pulleys, gears, etc. under extreme pressure environments to prevent jamming and sintering of mating components.

Instructions:

1. Before use, thoroughly wash the dust and oil on the surface of the object before coating.

2. Shake the tank vigorously for about 30 seconds to facilitate uniform spraying.

3. When spraying, move back and forth from the workpiece 20-30cm to spray uniformly.

4. The film can be hardened at normal temperature, but its coating film will be stronger under the conditions of 120 ° C and 15 minutes or more.

5. After use, turn the tank upside down and spray for about 5 seconds to clean the nozzle to prevent plugging.

Packaging and storage:

1. Packaging: 500ml / can, 24 cans / piece.

2. Storage: Store in a cool, dry and ventilated place with a shelf life of 1 year.

Address:No. 4, Lane 3821, Jiasong North Road, Fangtai Road, Jiading District, Shanghai  电话:021-60513232  MobilePhone:13817653540  E-mail:656669557@qq.com

Mobile