Product model: 3io-LS5092

Product name: Special synthetic grease for continuous casting machine

Specifications: 15KG / plastic drum 175KG / iron drum

Product use: Special lubrication for fully synthetic continuous casting machine is used in continuous casting machine of metallurgical industry, continuous rolling mill and other industries, such as bearings and molds of various parts of continuous casting equipment in steel plants, curved roller table, curved roller table Bearings, shears bearings, electric furnace ear protection bearings, etc.

Product category: Molybdenum disulfide and special grease

Product Details

The grease LS5092 for fully synthetic continuous casting machine is made of synthetic base oil and added with various additives such as anti-oxidation and anti-rust. Since the base oil is a fully synthetic type, the good oxidation stability greatly improves the service life of this product. The clean and carbon-free performance can effectively avoid pipeline blockage in the centralized lubrication system. The excellent lubrication performance allows the equipment to be better protected, prolongs the service life, and reduces the number of maintenance.

Performance characteristics of fully synthetic continuous casting machine special grease LS5092:

· Excellent high-temperature performance and long high-temperature service life. No grease loss or oil dripping is found in such high-temperature use.

· Perfect pumping performance, unique clean and carbon-free performance, stable pump pressure of 30 meters long pipeline, and no pump blocking phenomenon has been found;

· Strong oxidation stability, rust resistance, super wear resistance and extreme pressure resistance, working under such high temperature and high humidity, especially under heavy shock load, so as to ensure good bearing lubrication;

· Enhanced water resistance, under the spray of a large amount of cold water, no phenomenon of grease being washed away or emulsified was found, which did not affect the lubrication effect;

· Long service life, low consumption, unique heat recovery, can restore the original state after heating and cooling, only need to inject a small amount of grease in 3 days can meet the requirements.

Recommended grease for fully synthetic continuous casting machine LS5092:

· Widely used in metallurgical industry continuous casting machine, continuous rolling mill and other high-temperature friction parts, such as bearings and molds of various parts of continuous casting equipment in steel mills, arc rollers, curved roller bearings, shear bearings, electric furnace ear protectors Lubrication of bearings, ladle turret gears and bearings.

Operating characteristics of LS5092 continuous casting steel for full synthetic continuous casting machine:

· Because of a large amount of cold water spray cooling shears, water will enter the bearings and other lubricating surfaces. Due to the radiation of high-temperature steel billets, a large amount of steam is generated, keeping the grease at high temperature and high humidity conditions, and iron oxide scales will also enter the bearings. Therefore, the lubrication conditions are very harsh, and the following problems often occur when using other greases: bearing damage caused by a large amount of water flushing, because the iron scales enter the bearing, which causes the bearing to become stuck, and the grease is carbonized and coked at high temperatures, which requires frequent grease addition, which costs Large labor and lubrication costs.

· After using 8682A in a steel plant, after 8682A has good water resistance, excellent high temperature resistance and extremely long bearing life. Improve the sealing of the bearing, effectively prevent the iron scales from entering the bearing, thereby reducing bearing damage. The 8682A can extend the lubrication time by 3-8 times compared with ordinary grease, saving a lot of labor time and the cost of grease. It has also been reduced by half, and the cost of bearings has also been reduced by two-thirds, so steel companies in the United States, Germany, Japan and other developed countries have used products similar to 8682A.