Product model: 3io-TLR-4

Product name: MoS2 water-based lubricant for drawing

Specifications: 25Kg

Product use: MoS2 water-based lubricant for drawing is used for drawing special lubrication. This product is an emulsion made of molybdenum disulfide powder suspended in water.

Product category: Molybdenum disulfide water-based lubricant

MoS2 water-based lubricant for drawing is used for drawing special lubrication. This product is an emulsion made of molybdenum disulfide powder suspended in water.

1. Physical properties of molybdenum disulfide lubricant

1. Density: 1.02 ~ 1.09g / cm3.

2. pH value is 6.0 ~ 8.0.

3. Viscosity (25 ° C): 8000 ~ 20000m / Pa · s.

4. Appearance: black-grey slurry.

5. Has good applicability and lubricity, and has good lubricating properties.

6. Good cooling performance and high chemical stability.

7. Good adhesion, no corrosion to the workpiece.

8. Does not pollute the environment, is harmless to the human body, and is easy to use and operate.

Product use

1. Wire drawing lubricants are used as lubricants in the drawing of tungsten, molybdenum, rhenium, rhenium, titanium and their alloys.

2. Usage: It can be diluted 5 to 20 times with water, and can be used after being stirred evenly.

Third, matters needing attention

1. Do not allow the drawing lubricant to come in contact with the eyes. If you accidentally splash the eyes, lift the eyelids and rinse them with running water or saline

2. Do not swallow this product. If swallowed, do not induce vomiting.

Product packaging: 25kg ∕ barrel.

V. Validity period: six months (placed in a cool place).