Features and precautions of molybdenum disulfide lithium grease

Performance Characteristics of Gear Molybdenum Disulfide Lithium-based Grease

1.Excellent high temperature resistance and oxidation resistance to avoid grease loss during high temperature operation;

2. Excellent extreme pressure, anti-wear performance and bearing capacity, can reduce gear wear for a long time;

3. Excellent oil film adhesion and high speed resistance, effectively reduce motor noise without affecting load;

4. Excellent water scour resistance, rust and corrosion resistance, long service life.

Taking closed gear box gear lubrication as an example, if the factors of the product machinery itself are not considered, the reasons for the excessively high temperature may be:

1. The new gear mechanism is not running well, and abrasive wear occurs, causing the tooth surface temperature to rise. At this time, the filtration should be strengthened and the grease changed after running in.

2. Heavy load, oil film rupture, wear and other failures tend to cause the temperature of the tooth surface to rise. At this time, you should select the correct oil according to the load, increase the viscosity grade, or use extreme pressure resistant gear grease.

3. The viscosity of the oil is too large, which increases the stirring heat and makes it difficult to dissipate heat. The oil temperature and the tooth surface temperature rise simultaneously. At this time, the oil level should be lowered and the oil with a lower base oil should be selected.

Recommended application of gear lithium molybdenum disulfide grease

1. It is suitable for lubrication and noise reduction of high temperature friction parts of various industrial equipment, metal gears of high-speed reduction motors, worm gears and worm gears.

2. Particularly suitable for lubrication, noise reduction and anti-wear of gear transmissions, chains and bearings under working conditions;

Precautions for gear lithium molybdenum disulfide grease

1. Due to the strong viscosity, the filling amount should not be too much. Make sure that the greased part is dry and clean before use;

2. Do not mix with other lubricating greases. When using and storing, prevent impurities from entering.